REDBAG VERITAis a ready-to-use elastic vapor-permeable putty with the addition of fiberglassintended for filling small irregularities, depressions and cracks, as well as for fiberglass processing and finishingconcrete,cement, cement-lime,lime,gypsumsurfaces, including gypsum board,wood-fiber, chipboard and OSB boards, before painting with all types of dispersion paints or decorative finishes. Can be used in rooms with normal humidity levels, including kitchens and bathrooms. For leveling up to 5 mm thick. Suitable for manual and machine application to create surfaces with quality levels Q3 and Q4. Especially suitable for leveling "more problematic" weak, unplastered concrete surfaces and unplastered aerated concrete surfaces.

The substrate is prepared in accordance with DSTU-N B A.3.1-23:2013 and DSTU-N B V.2.6-212:2016. The surface must be dry and strong, without visible damage. Before applying the putty, the surface must be cleaned of dust, deposits, oil stains and other substances that reduce adhesion. The surface must not have sinks, cracks, or differences with a depth of more than 2 mm. Paint coatings that are loosely connected to the substrate must be removed. Cement, cement-lime, and gypsum plaster substrates must have a residual moisture content below 4%. Such substrates have high moisture absorption, so after cleaning, before applying the putty, they must be treated with a deep penetration primer REDBAG ADHESIS.

Mix REDBAG VERITA putty thoroughly for 2 minutes before application. Then apply evenly to the surface with a steel trowel or half-trowel and distribute in an even continuous layer. Application is carried out in several layers, the next layer is applied after the previous one has dried. The maximum layer thickness is 5 mm. Do not moisten the putty with water during the drying period. Excess uncured material can be washed off with water. Hardened putty can only be removed mechanically. The drying time of the putty is 5 hours. Complete drying is not earlier than after 24 hours. Drying time increases as the temperature decreases and the relative humidity increases.

After the first and second coat of coating, the surface can be sanded manually or by machine with fine sandpaper, No. 150 – 240.

REDBAG VERITA putty cannot be mixed with other materials (paints, plasters, etc.). Do not use tools or containers that rust.

Work should be carried out in dry conditions at a temperature not lower than +5 °C and a relative humidity not higher than 80%.

Consumption is 1.2 kg/m2 with a layer thickness of 1 mm. Consumption depends on the unevenness of the base and the skills of the performer.