Reviews
The 801st waterproofing fully meets the stated characteristics, is easy to use, and is not inferior in quality to its expensive counterparts. The 322nd screed is easy to install, flexible, and there is no visible shrinkage. I recommend it!
The 801st waterproofing fully meets the stated characteristics, is easy to use, and is not inferior in quality to its expensive counterparts. The 322nd screed is easy to install, flexible, and there is no visible shrinkage. I recommend it!
The REDBAG 222 facade reinforcing mixture is elastic, easy to work with, fine mixture fraction, no sand, and easier to spread.
The REDBAG 222 facade reinforcing mixture is elastic, easy to work with, fine mixture fraction, no sand, and easier to spread.
Last time we used tile adhesive 111. Works well outdoors. 222 and 221 have often worked with these mixtures, good price-quality ratio.
Last time we used tile adhesive 111. Works well outdoors. 222 and 221 have often worked with these mixtures, good price-quality ratio.
I have been using RedBag for a long time. I started working with apprehension, but the mixtures did not let me down, they are of very high quality. Excellent tile adhesive 113, better than Ceresit 117, the adhesive is elastic, very good adhesion. The first thing we tried was facade mixtures, it was scary, new, not time-tested. Now my team of facade workers does not recognize any other glue, they praise it, only 221, 222 work. It perfectly glues polystyrene, polystyrene, cotton wool, we used it even without fungi, it holds well, it does not crumble when drying. I want to note that sometimes you still need to listen to the manager-consultant and read the instructions, because failure to follow the 100% correct technological process can have dire consequences. The RedBag company is responsible for its mixtures, thank you, you helped, the problems were solved and now - everything is only according to technology...
I have been using RedBag for a long time. I started working with apprehension, but the mixtures did not let me down, they are of very high quality. Excellent tile adhesive 113, better than Ceresit 117, the adhesive is elastic, very good adhesion. The first thing we tried was facade mixtures, it was scary, new, not time-tested. Now my team of facade workers does not recognize any other glue, they praise it, only 221, 222 work. It perfectly glues polystyrene, polystyrene, cotton wool, we used it even without fungi, it holds well, it does not crumble when drying. I want to note that sometimes you still need to listen to the manager-consultant and read the instructions, because failure to follow the 100% correct technological process can have dire consequences. The RedBag company is responsible for its mixtures, thank you, you helped, the problems were solved and now - everything is only according to technology...
We were building a very technically complex object, an open terrace. We had poor-quality waterproofing of the seams, which led to water leaking into the room. A technologist arrived at the object to make a technically correct decision. The task was given to completely dismantle the previously made cake. It was decided to fill the adjacent area with the seams with RedBag 322 elastic screed, with the addition of a special water repellent in half with water (which gives the mixture elasticity and enhances water repellent properties). The screed is very convenient to work with, stretches easily, cools well, does not tear off from the hands. It did not give any subsidence. After the screed has hardened and gained the necessary strength, a layer of RedBag 801 plastic waterproofing was applied on top, with the addition of the same water-repellent emulsion, applied under a spatula, with a layer thickness of 2 mm. After the work is completed, after the water in the apartment has drained. It is very important to add water exactly as written on the bag.
We were building a very technically complex object, an open terrace. We had poor-quality waterproofing of the seams, which led to water leaking into the room. A technologist arrived at the object to make a technically correct decision. The task was given to completely dismantle the previously made cake. It was decided to fill the adjacent area with the seams with RedBag 322 elastic screed, with the addition of a special water repellent in half with water (which gives the mixture elasticity and enhances water repellent properties). The screed is very convenient to work with, stretches easily, cools well, does not tear off from the hands. It did not give any subsidence. After the screed has hardened and gained the necessary strength, a layer of RedBag 801 plastic waterproofing was applied on top, with the addition of the same water-repellent emulsion, applied under a spatula, with a layer thickness of 2 mm. After the work is completed, after the water in the apartment has drained. It is very important to add water exactly as written on the bag.
Where to buy?
