REDBAG DRY FORCE– a highly concentrated liquid emulsion, which is intended as an additive to dry building mixtures of the REDBAG TM, namely:

• REDBAG 111, REDBAG 112, REDBAG 113, REDBAG 114, REDBAG 115, REDBAG 116.
• REDBAG 321, REDBAG 322, REDBAG 324, REDBAG 333.
• REDBAG 440, REDBAG 444.
• REDBAG 801.

Designed to increase the hydrophobic characteristics of cement mixtures in areas of frequent or intense exposure to water. Reduces water absorption, provides waterproofing properties, increases elasticity and crack resistance.

• When facing open balconies, terraces, roofs as an additive to tile adhesives, screeds and plasters in order to create technological protection against the leakage of precipitation, melted snow, etc.
• When arranging baths, saunas, shower cabins as an additive to tile adhesives, screeds and plasters to ensure complete protection against moisture entering the base of the ceiling and walls.
• To solve the problem of "wet" basements, it is added to screeds and plasters that do not allow moisture to enter these basement rooms. Cement mortars with REDBAG DRY FORCE become resistant to negative water pressure.
• REDBAG DRY FORCE is used with REDBAG 801 waterproofing as the second component of a two-component waterproofing for waterproofing mineral surfaces, building structures that undergo deformation during operation: plasterboard partitions, open terraces, swimming pools, treatment plants, tanks designed to store water, including drinking water, and in other similar cases.

REDBAG DRY FORCEemulsion must be thoroughly mixed before use. Prepare the mortar mixture by using REDBAG DRY FORCEemulsion instead of water at the rate of 4 liters of emulsion per bag of REDBAG TM dry mixture. To obtain a more liquid mortar mixture, it is necessary to adjust the consistency by adding water.

The composition of the dry mixture and the emulsion REDBAG DRY FORCE should be used in accordance with the purpose and technical description of the corresponding product with which the emulsion is used.

Attention! The emulsion REDBAG DRY FORCE improves the plasticity, thixotropicity, alkali resistance, water-holding capacity of the mortar mixture, but at low temperature and high humidity, its hardening time and the rate of strength gain may increase, and at relatively high temperature and low humidity and in the presence of blow-offs, a dried polymer film may form on the surface of the layer. This may lead to a decrease in the adhesion of subsequent layers of solutions and a decrease in vapor permeability.

4 liters of emulsion per bag of mixture TM REDBAG.

4 liter plastic canister